SH & SC Series Threaded Studs

/SH & SC Series Threaded Studs
SH & SC Series Threaded Studs2018-09-17T13:20:08+00:00

SH & SC Series: Threaded Studs for Plastics

SH & SC Series Threaded Studs for PlasticsThreaded studs are commonly used to fulfill specific design functions, to save money in production costs, to function as electrical contacts or to replace self-tapping or removable screws. Thread lengths are available to meet your specific requirements. Special studs without threads can be used as axles, pivots, pins, locating points or solder terminals.

The body of the SH Series Threaded Stud is specifically modeled after our H Series Insert. Its key feature is the tapered design, which allows for easy insertion into tapered molded or drilled holes. They may be installed using the thermal or ultrasonic method or can be molded in place.

The body of the SC Series Threaded Stud is modeled after our C Series Insert. Its key feature is the opposing diagonal knurls, which will provide exceptional rotational and tensile resistance. The SC Series is designed for straight molded or drilled holes. They may be installed using the thermal or ultrasonic method or can be molded in place.

Recommended Hole Size – See chart below for installation hole size. Additional information can be found in our Design Guidelines.

Printable Catalog Page (SH)
Printable Catalog Page (SC)
Tapered Threaded Studs Line Diagram
SH SERIES
THREADED STUDS
INCH METRIC A
±.004
B
±.004
C
±.004
Hole E
+.002 -.000
Hole F
+.002 -.000
G
±.010
Min.
Boss
Thread
Size
Part
Number
Thread
Size
Part
Number
2-56 S256X M2.0 x 0.4 SM20X .141 .188 .112 .123 .107 S
P
E
C
I
F
Y
*
.246
4-40 S440X M2.5 x 0.45 SM25X .172 .219 .146 .159 .141 .318
6-32 S632X M3.0 x 0.5 SM30X .219 .250 .190 .206 .185 .412
M3.5 x 0.6 SM35X .219 .250 .190 .206 .185 .412
8-32 S832X M4.0 x 0.7 SM40X .250 .312 .213 .234 .208 .468
10-24 S1024X M5.0 x 0.8 SM50X .297 .375 .251 .277 .246 .554
10-32 S1032X .297 .375 .251 .277 .246 .554
1/4-20 S2520X M6.0 x 1.0 SM60X .375 .500 .332 .363 .321 .726
1/4-28 S2528X .375 .500 .332 .363 .321 .726
5/16-18 S3118X M8.0 x 1.25 SM80X .469 .562 .406 .448 .401 .896
5/16-24 S3124X .469 .562 .406 .448 .401 .896
3/8-16 S3816X M10.0 x 1.5 SM100X .563 .625 .493 .540 .488 1.080
3/8-24 S3824X .563 .625 .493 .540 .488 1.080

* When ordering, customer needs to specify the “G” dimension to form the part number.
Example: 8-32 with a thread length 1/2″ (.500”) = S832 x 500H

Part numbers for Stainless Steel Inserts are the same as listed in the chart, but ending with -SS.

Chevron Threaded Studs Line Diagram
SC SERIES
THREADED STUDS
INCH METRIC A
±.004
B
±.004
C
±.004
G
±.010
Hole H
+.002 -.000
Min.
Boss
Thread
Size
Part
Number
Thread
Size
Part
Number
2-56 S256X M2.0 x 0.4 SM20X .143 .157 .123 S
P
E
C
I
F
Y
*
.126 .252
4-40 S440X M2.5 x 0.45 SM25X .186 .226 .154 .157 .314
M3.0 x 0.5 SM30X .186 .226 .154 .157 .314
6-32 S632X M3.5 x 0.6 SM35X .218 .281 .185 .188 .376
8-32 S832X M4.0 x 0.7 SM40X .249 .321 .218 .221 .442
10-24 S1024X M5.0 x 0.8 SM50X .280 .375 .249 .252 .504
10-32 S1032X .280 .375 .249 .252 .504
1/4-20 S2520X M6.0 x 1.0 SM60X .342 .500 .312 .315 .630
1/4-28 S2528X .342 .500 .312 .315 .630
5/16-18 S3118X M8.0 x 1.25 SM80X .406 .500 .374 .377 .754
5/16-24 S3124X .406 .500 .374 .377 .754
3/8-16 S3816X M10.0 x 1.5 SM100X .498 .500 .465 .468 .936
3/8-24 S3824X .498 .500 .465 .468 .936

* When ordering, customer needs to specify the “G” dimension to form the part number.
Example: 8-32 with a thread length 1/2″ (.500”) = S832 x 500H

Part numbers for Stainless Steel Inserts are the same as listed in the chart, but ending with -SS.